Flammability Tester

Horizontal Vertical Flame Tester for Textiles Roles The burning of textiles may produce smoke and toxic gases that affect the health of the operator, and the tester should wear a gas mask. The tester can be installed in a fume hood and the smoke and soot should be removed after each test, but the ventilation system should be turned off during the burning of the specimen to avoid affecting the test results. KS-5455D Textile Horizontal Vertical Flame Tester adopts the one-piece structure and the principle of large box over small box, the combustion box is placed in the fume hood made of baked cold plate, the left panel of the cold plate fume hood has instrument timer, ignition button, lighting, exhaust and other functional buttons. The upper part of the fume hood is installed with the exhaust air and smoke vent connected with the interior of the combustion chamber, and the interior is installed with a soot cleaning device, and the soot handling device is composed of dust removal plate an...

The Textile UL94 Horizontal Vertical Flame TesterTechnical Parameters UL94 Horizontal Vertical Flame Tester technical parameters： 1. Sample frame: It consists of a rectangular metal frame. 12 sample fixing pins are installed along the long side of the rectangular frame with a length of 560mm and a width of 150mm. The distances between the sample fixing pins and the bottom edge are 5mm, 10mm and 190mm respectively. , 370mm, 550mm and 555mm, the length of the fixed pin is 30mm. 2. Template: used for sampling for sample drilling. 3. Timing device: time the three marking lines respectively, and the timing stops automatically when each marking line is burnt. 4. Combustion gas source: industrial propane or butane or propane/butane mixed gas (provided by the user) 5. Sample: L560mm*W170mm, 3 pieces each in the warp and weft direction